Today, we are expanding our web application firewall (WAF) by adding two new capabilities: full transaction detections and response rules. Full transaction detections evaluate each HTTP request alongside its response to identify evidence of exploitation. It helps answer both "Does this request look malicious?" and "What happened when the application handled it?" Response rules can then block the origin’s response before it reaches the requester.

These are valuable protections because the latest frontier models are uncovering vulnerabilities buried deep in widely used software, giving defenders clarity on what to fix — and attackers new paths to exploit. The recent php2shell vulnerability shows the stakes: a flaw in a common software component can put applications across the Internet at risk. AI agents scanning for vulnerabilities can be extremely persistent, adapting payloads using feedback, and chaining vulnerabilities, credentials, and permissions. An application's response can reveal whether an attempt worked and give an attacker information that helps them go deeper.

Inspecting incoming requests remains essential for stopping recognizable attacks before they reach an application. But some threats become clear only when the request is considered alongside what the origin returns. A suspicious input followed by a response exposing sensitive information tells a different story from the same input followed by a rejection or an error.

With these new capabilities, customers can use Cloudflare-managed protections or build their own policies combining request and response properties. This extends our always-on application security framework, with detection results available in Security Analytics to support investigation. Our first managed protections using this capability address the recently disclosed php2shell vulnerability.

And the best part? We are making these new capabilities generally available to all Cloudflare customers, including Free plans.

Request inspection is not enough

Cloudflare WAF protects websites and APIs with managed rules, custom rules, and rate limiting. Managed rules provide protection for known attack techniques and vulnerabilities while custom rules let teams create their own policies using parameters such as an IP address, URL path, headers, and request body. These controls operate at the request level to stop exploits or unwanted traffic from reaching the origin.

For many threats, this is the right place to act. However, treating every suspicious request as a confirmed exploit creates a difficult choice. Broad request signatures can catch more potential attacks, but they can also show “false positives”, such as matching legitimate traffic — which then breaks the applications. Deploying only rules that do not trigger false positives reduces that risk, but can leave more room for more ambiguous traffic to reach the server.

The response provides the missing evidence. Cloudflare can now correlate it with the request that produced it, so detections can account for the outcome of the entire HTTP transaction.

As an illustrative example, consider an application that lets users download files. An attacker manipulates the file parameter to request a private configuration file outside the permitted directory:

GET /download?file=../../config/database.ini

Request inspection can recognize this path traversal attempt and block it before it reaches the application. The request alone, however, cannot establish whether the application would expose the file. It might reject the request, ignore the traversal, or return an error. If the request reaches the origin, a response like this provides additional evidence:

200 OK
Content-Type: text/plain
[database]
username=app_service
password=EXAMPLE_SECRET

Full transaction detection provides a missing piece: it can correlate the attempted file access with response content characteristic of a private configuration file. Configuration-like text can legitimately appear in documentation or example downloads; combining it with a traversal attempt provides stronger evidence of sensitive data exposure than either signal alone. A response rule can then replace the origin response with a Cloudflare WAF block page and HTTP 403 before it reaches the requester, effectively blocking the exploit by preventing sensitive information from reaching the attacker.

Detection and mitigation are separate by design

Full transaction detection extends the always-on detection framework we introduced earlier this year. Detections analyze traffic and attach metadata to the request and response, rules then decide what to do with those results.

Separating those jobs gives customers visibility before they design a policy. Security teams can inspect detections in their own traffic, understand which endpoints and signatures are involved, and choose the response that fits their application. Similar to the approach for the request-based Attack Signature Detection, the outcome of the detections are stored in fields that can be accessed in the response custom rules or used in managed detections to block traffic.

Mirroring the request detection fields, the following new fields are added to our platform:

The first full transaction detections focus on exploit confirmation for high profile vulnerability. It correlates suspicious input with response signals that indicate an exploit may have succeeded.

We will expand coverage over time by supporting other use cases, including detecting data exposure and exfiltration signals. This is important for the Internet beyond any one application: defenses can distinguish probing from evidence of impact, while detection of exposed data and services can reach customers that do not have a dedicated security team tuning every WAF rule.

Create rules on the response

Detecting evidence of exploitation is most useful if you can act on it in real time. Response custom rules turn full transaction detections into inline protection by blocking a matching origin response before it reaches the requester, although it cannot undo actions already performed at the origin.

Security teams can now combine request and response properties with detection results to decide which responses to block. When a blocking rule matches, Cloudflare replaces the origin response with a WAF block page or a custom response.

Response phase controls are available in the Cloudflare dashboard at the bottom of the Security > Security Rules page, with both managed protections and custom rules.

We have released both managed and custom rules to all plans, including Free plans. Over time, we will follow the same approach we use for request detections, where managed detections for free plans focus on high-profile vulnerabilities, while paying customers get a richer catalog of detections.

Managed detections

All customers get the protection of the full array of transaction detections through the Cloudflare Managed Response Firewall Default ruleset, which is designed for a simple one-click deploy and simplified configurability. When a signature matches, the managed detection will block the response and return a standard WAF block page.

You can edit the Cloudflare Managed Response Firewall Default scope to run detections only on a portion of their applications, for example by excluding or restricting the detection to a specific path. Paying customers can use detection fields in custom response rules to create more tailored policies.

Custom rules

Custom response rules are designed to give customers full control of the rule logic. A useful rule can stop an administration interface from being exposed when an authentication gateway has not marked the request as internal. For example:

http.request.uri.path starts_with "/admin" and not http.request.headers["x-internal-user"][0] eq "true" and http.response.code eq 200 and http.response.headers["content-type"][0] contains "text/html"

This blocks only when an unauthenticated request targets `/admin` and the origin actually returns a successful HTML administration page. It does not block ordinary authentication failures, redirects, or non-administration traffic.

All customers can create up to three custom response rules supporting Log and Block actions. The fields and functions available in response to custom rules mirrors what your plan gives you access to in request custom rules already. Creating rules on the response body is not yet available.

Following the Attack Signature Detection approach, paying customers also have access to the outcome of attack detections through the cf.waf.signature.response.*  fields listed above. These fields can be combined with other parameters (such as a hostname, URL path, source IP, request header) to enable protection on a single path, or limit the policy to application-specific context. We are currently rolling out the response fields to all our accounts. If you don’t have access to them yet, please contact your account team.

Investigating matching requests

When a managed or custom response rule logs or blocks a transaction, the event is available in Security Events. This means responders can trace any detection back to the full context of the request and the specific rule that took action.

At the moment, both request-only rules and full-transaction rules are shown together in the same analytics page. In Security Events, the events generated by response rules are part of the Managed Rules or Custom Rules service. You can filter events belonging to a specific rule ID in the relative rule list section.

Get started today

Full transaction detection is generally available for all zones proxying traffic through Cloudflare. To verify that you’re protected, go to Security > Security Rules in the Cloudflare dashboard. If you want to customize your policy, start by reviewing full transaction detections in Security Analytics, then create the response phase policy that fits your application.

Update - On October 23, the PHP project published an informational advisory for a related vulnerability, CVE-2026-115560, in PHP's session upload progress feature. It affects fully patched PHP releases, including 8.5.12, and will be fixed in PHP's next regular release.

All Cloudflare WAF customers are protected against known exploit attempts if their site uses PHP's default upload progress field name. Customers who have changed session.upload_progress.name are not covered by the WAF rule.

The existing rules "PHP Remote Code Execution Attack (CVE-2026-109618, CVE-2026-109619) #6" protects against this vulnerability.

More information to follow.

October 21, Calif.io, Wiz, OpenAI and Quarkslab disclosed two vulnerabilities in PHP, tracked as CVE-2026-109618 and CVE-2026-109619 and known as php2shell. The vulnerabilities affect all web servers running PHP 5.4 or later and they may allow an attacker to cause denial of service, remote code execution, and data exposure when an application processes specially crafted HTTP traffic.

Cloudflare has been part of a coordinated effort to deploy mitigations to protect the Internet, working with PHP foundation, OpenAI and Wiz among others. Cloudflare has developed and deployed web application firewall (WAF) protections since early October 2026, which were deployed about 9 hours ahead of public disclosure. Starting on October 21 3:02 am UTC, Cloudflare customers using our free or paid WAF were protected by default against php2shell.

Cloudflare successfully deployed multiple mitigations for all its customers while the vulnerability was leaked before the official release date and we observed attack traffic targeting our customers. We observed how attackers were mutating the attack payload to try to bypass our protections by tracking the volume of matches and cross-referencing with the rule logic.

Protecting against php2shell required more than standard request-based rules. Request data alone does not always provide enough evidence to distinguish an exploit from legitimate traffic. The origin’s response adds context, helping identify whether an exploit succeeded while reducing the risk of false positives.

To deliver this protection, we developed full transaction detection, a new Cloudflare WAF capability that combines signals from the request and response within the same HTTP transaction. Response rules can then block a matching origin response before it reaches the requester. The php2shell protections are the first managed detections we have released using this capability.

Customers should patch their PHP repos even with WAF protections providing an additional layer of defense-in-depth mitigation. Our security analysts continue monitoring attack activity and update the rules when and if new techniques and variations emerge in the hours and days ahead. You can track new rules in the changelog.

The protections are available and deployed automatically on all plans with WAF deployed, including Free users.

What we know about the vulnerabilities

PHP is used by almost 70% of websites. The php2shell vulnerabilities affect the PHP runtime itself and can allow attackers to execute malicious code on vulnerable servers, expose customer data, or disrupt services. Because PHP underpins widely used platforms such as WordPress and Magento, these flaws could potentially affect a large number of applications across the Internet.

The two vulnerabilities involve how PHP handles memory when something goes wrong while processing a HTTP request. Normally, PHP allocates memory to store the data it needs to process a request, then releases it when that work finishes. If processing stops unexpectedly, for example because it runs out of memory, PHP fails to clean up the memory safely. These vulnerabilities arise when PHP handles an error and then tries to use data that was not fully set up or memory that has already been released.

An attacker can send specially crafted HTTP requests to trigger these conditions. Large requests are one way to put memory under pressure, but the problem goes beyond consuming server resources. By manipulating the data PHP encounters in this invalid memory, an attacker may be able to crash a PHP process, expose sensitive information, or execute code provided by the attacker.

The two vulnerabilities differ in when the unsafe memory access happens:

These flaws are in the PHP runtime, so updating website code or a plugin(s) alone does not fix these vulnerabilities. Administrators need to update the PHP software running their applications. If a hosting provider manages PHP, ask the provider to apply the security update.

Administrators can follow the PHP advisory for affected versions and remediation instructions. Keep Cloudflare WAF protections enabled while patching. Restricting unnecessary uploads and limiting upload sizes can also reduce exposure, but these measures do not replace the PHP fix.

New rules

For Free customers, new rules have been released under the Cloudflare Managed Free Ruleset (Ruleset ID 77454fe2d30c4220b5701f6fdfb893ba). Free customers don’t have to take any actions to enable the protection. To override the ruleset behavior, you can refer to our documentation.

Protection for paid plans has been released as part of the Cloudflare Managed Ruleset (Ruleset ID efb7b8c949ac4650a09736fc376e9aee). If you are on a Professional, Business, or Enterprise plan, review your Managed Ruleset deployment to confirm it has deployed block mode.

To better identify exploit attempts, Cloudflare developed full transaction detection, a new WAF capability that analyzes both sides of the same HTTP transaction. While some malicious payloads can be identified using the request alone, the response contains useful signals that can be used to create rules with higher confidence, reducing false positives. A matching full transaction rule can block the origin response before it reaches the requester. Learn how it works in our full transaction detection blog post.

The new Cloudflare Managed Response Firewall Default has been automatically deployed for customers on all plans, including Free. To verify that the response rules are active, you can visit the Security > Security Rules page. Read the full transaction blog to learn how to customize its deployment.

Review events and customize protection

To analyze blocked requests, visit Security > Security Analytics > Events. Filter by the rule IDs in the table above and inspect the matched request, action, and path. Events identify whether the action came from a managed or custom rule. Customers who need to tailor the protection can update the scope of the Managed Ruleset to the parts of an application where it is relevant.

Update PHP and keep the protection enabled

Cloudflare customers using our Managed Ruleset are protected by default. We recommend following the advisory recommendation and applying the vendor update to your PHP repos as soon as possible while keeping the WAF protection enabled as an additional protection. Our WAF analysts will continue to update protections as new techniques emerge.